Stone Veneer Installation in Pittsburg CA - a finish that belongs to your house
A plain or worn wall you'd like to dress up? We check what's underneath first, then set each stone with care.
- Licensed and insured.
- Free on-site estimates.
- We reply within 1 business day.
What goes into a stone veneer job in Pittsburg?
Stone veneer installation in Pittsburg, CA puts a thin facing of stone on a wall that's already standing, so a plain block wall, a bare foundation or a dated house front gets the look of stone without building a stone wall from scratch. Most of the time on a job goes into the wall underneath, because that's what the stone depends on.
Most people who call about veneer have a wall they're tired of looking at, and a few have one that's starting to crack or crumble. The price moves mainly with the size of the wall in square feet, how much repair it needs before stone can go on, how many corners, windows and edges we have to cut around, and the look you pick. The schedule turns on that same repair work and on whether the city wants a permit, and I'll go over both with you, along with your own figure, once I've stood in front of the wall. If the old surface is brick that's worn out, brick repair may need to come first.
How do you know a wall is ready for stone veneer?
Bare block that looks unfinished
A gray block wall along the yard or under the house often looks like a job someone never finished. If the block itself is solid, it's usually a good wall for veneer, and catching any cracks now costs far less than finding them after the stone is up.
Cracks or crumbling spots
Cracks, flaking or mortar you can rub out with a finger mean the wall needs work before anything gets stuck to it. Putting stone over it hides the problem for a while, and then the stone comes loose along with the wall behind it.
Old veneer coming loose
Stones that rock, gaps that keep opening or pieces lying on the ground usually point to a weak wall behind them or a rushed install. The longer it goes, the more water gets in behind the stone and the more pieces let go.
How we handle stone veneer installation
I look hard at the wall underneath first, and if it's in poor shape we fix it before any stone goes on, because the stone is only as sound as what it's stuck to. Once the wall is solid, we clean the bare surface, and where it won't hold stone on its own we put up a wire mesh and a first coat of mortar for the stone to grab. Then we lay the pieces out on the ground to mix colors and sizes, cut what needs cutting with safety glasses and dust masks on, and set each stone by hand. The stone only looks as good as the hands setting it, so we take our time on every piece before we finish the joints and clean up.
Veneer is a facing, so plenty of our veneer jobs start with the wall itself. If you want stone on a yard or garden wall that isn't built yet, we can put up concrete block walls that give the stone a flat, solid face. If the block under your house is cracked or failing, foundation block wall installation gets it sound before we dress it up.
Mortar joints between the stones
The stones are set with a visible line of mortar between them, which reads as a classic stone wall and forgives small differences in the stone's shape. It suits most homes and most walls, and it's what most people pick.
Tight-fit dry-stack look
The stones fit tight with little or no joint showing, which gives a cleaner, more modern face. It takes more stone because every piece has to sit snug against the next, so plan on a bigger order and a bit more cutting.
Get a written estimate for your stone veneer wall
Send the form and we'll reply within one business day. I'll come out, look at the wall with you and write up a free estimate in plain terms, with no obligation to go ahead.
(925) 318-8090- Based in
- Pittsburg, CA 94565
- Hours
- Mon–Fri: 7 AM–10 PM, Sat–Sun: 6 AM–11 PM
What happens after you call us about stone veneer?
From your first call to the last walk-through, here's who does what, so you know what's coming at each stage of your job.
- +01
Call or send a message
Call (925) 318-8090 or use the form, and tell us a little about the wall. We'll get back to you and set a time for me to come out.
- +02
Walk the wall together
I come out myself, look at the wall with you and answer your questions about it. You get a written estimate that says what we'd do to the wall, what stone work is included and what it costs, so there's no guessing.
- +03
We do the work, then walk it
If you go ahead, we take care of any permit paperwork, then our crew and I do the repair and set the stone. When the last stone is set, we walk the wall with you so you can see every part of it.
Why Pittsburg homeowners call A&K for stone veneer
With stone veneer, what matters most is the wall the stone is going on, so that's where I start. When you're ready, send us a note and I'll come out and have a look.
I look at every wall myself
We're based in Pittsburg, and I come out to see every job in person, and the work is done by me and our crew. The person who judged your wall is the one standing there when the stone goes up.
In business since 2017
We've been at this as a business since 2017, 9 years now. That's long enough to have seen what holds up on a wall and what doesn't.
Ask about our license
California's masonry contractor license covers setting natural and manufactured stone, so it's fair to ask anyone you're considering about theirs. We're licensed and insured, and I'm glad to talk it over at the estimate.
Our promise on every job
Satisfaction guaranteed on every job is the promise we make. It's why I'd rather spend an extra hour on a corner than leave one you'll notice from the driveway.
Stone veneer and wall work in Pittsburg
Permits for building work in Pittsburg run through the city, which handles every step from taking the application to the final inspection. The city's online permit guide, OpenCounter, gives general answers only, so treat it as a starting point, because city staff make the final call on permits, fees and zoning and ask people to contact them directly with questions. The city decides what needs a permit, so we check with them before we start, and when your job needs one, we pull it and handle the paperwork.
On jobs around here we see a lot of plain block yard walls, stucco house fronts and older foundations that people want dressed up, and plenty of them need some repair before stone can go on. We see the same walls on jobs in Antioch and Concord, and we handle them the same way, wall first and stone second.
Questions about stone veneer in Pittsburg
What is manufactured stone veneer?
Manufactured stone veneer is a lightweight facing made from cement-based materials and aggregates so it looks like natural stone. It isn't load-bearing, so it covers the wall's surface but carries none of the building's weight. The wall behind it does the real work, which is why its condition matters.
Can stone veneer go over my existing wall?
Usually yes, as long as the wall is sound. The industry installation guide says the stone belongs on sound backing walls, not on deteriorating or unsound ones, and not on EIFS, a foam insulation board finished to look like stucco. If your wall is in poor shape, plan the repair as part of the project.
How much does stone veneer installation cost in Pittsburg, CA?
Across the US, stone veneer installation usually costs about $25 to $40 per square foot installed. That's a national going rate, not our price, and where your job lands depends on the wall's size, how much repair it needs and the look you choose. I'll give you your own figure after I've looked at the wall.
How long does stone veneer installation take?
It depends mostly on the size of the wall and how much repair it needs first, which I'll go over with you at the estimate. Cold weather can stretch it, because an industry guide specification calls for protecting the work when it's 40°F or colder, before the masonry work, during it and for 48 hours after it's done. In that kind of cold, the new stone gets covered through that whole stretch.
How do I pick a stone veneer installer in Pittsburg?
Pick someone who checks the wall first and doesn't rush the setting, because the industry's installation guide says field workmanship tends to be the main cause when stone veneer doesn't perform. The same guide says following its recommended practices helps the stone hold up as intended for decades. Ask anyone you're considering how they'd prepare your wall.
How do I clean stone veneer once it's up?
Use soap or detergent, water and a bristle brush, then rinse right away with fresh water, which is what one stone maker's guide calls for. That guide rules out acid cleaners, power-washing, sandblasting and wire brushes, and says a wire brush damages the surface. Check the instructions from your own stone's maker, since that's the guide you'll follow.
Wall work that often comes before the stone
If you need a new garden or yard wall to face with stone, a block wall gives the veneer a solid, even surface to grip.
When the block foundation under the house is cracked or worn, new block work gives you a sound base before any stone goes on.
Where we install stone veneer around Pittsburg
A&K Pittsburg Concrete and Masonry is based in Pittsburg, California, and works in Pittsburg and the cities around it. Twelve cities have their own page here, including Bay Point and Walnut Creek, though they aren't the only places we work.
Send us photos of your wall
If you call or fill out the form with a few photos, the wall's current finish and its rough size in square feet, I'll come out already knowing what to look for.
Pittsburg, CA